Multi-pattern condenser mic with contemporary design and excellent performance characteristics.
The CX-212 is an exceptional tool for project studios, professional audio production, and live stage performances. Delivering a smooth, uniform frequency response from 30 Hz - 20 kHz, the CX-212 offers a choice of three polar patterns: cardioid, omni-directional, and figure 8. Additionally, the CX-212 is equipped with a bass roll-off filter to help eliminate rumble and hum in the lower frequencies. The CX-212, which will handle sound pressure levels up to 132 dB, is a perfect candidate for a wide variety of acoustic instruments, vocals, string sections, ensembles, and ambient room miking. The CX-212, which is designed with discreet low noise preamp circuitry, operates on phantom power of 48-52 volts. Optimum results will be achieved by using the CX-212 with a high quality mic preamplifier and premium quality microphone cable.
Multi-pattern: Cardioid, Omni, Figure-8
1.07 gold vapor diaphragm Low noise electronics
Rich, warm tones ideal for digital recording Heavy duty isolation shock mount included
APPLICATIONS:
Studio vocals, lead and backing Voice, over Choir
Ambient room mic
Drum overheads, Orchestra Bells, chimes, marimba, vibes
Acoustic instruments (piano, sax, strings, guitar, flute)
Electric guitar cabs
SUPPLIED ACCESSORIES:
Adjustable one-piece metal clip (MC-112)
Isolation shockmount (SMT-CX112)
Audix CX212 Muli-Pattern Large Diaphragm Condenser Mic Features:
- Transducer Type: Condenser
- Capsule Technology: 1.07"/27mm Gold Vapor Diaphragm
- Frequency Range: 30 Hz - 20 kHz (+/- 3 dB)
- Polar Pattern: Multi-Pattern
- Output Impedance: 200 Ohms
- Sensitivity O/C: 16.5 mV/ 26 mV (ref 1k @ 1 Pascal)
- Noise Floor: 18 dB (A weighted)
- Signal to Noise Ratio: 76 dB (ref 1k @ 1 Pascal)
- Power Requirements: 48v +/- 4v phantom
- Maximum SPL: 132 dB
- Dynamic Range: 110 dB
- Cable/Connector: 3-pin gold plated male XLR connector
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Housing: Copper alloy body
- Finish: Black satin
- Weight: 17 oz / 480g
- Overall Length: 172 mm
All the EQing and effects in the world can't replace a good mic. Start right. Call or click now to order.