Superior weaponry.
From inputs to outputs, this is one powerful battle scratch mixer. The crossfader is a deluxe Penny & Giles VCA reversible design. The faders have contour controls, and they can all be easily replaced by removing the steel faceplate. The fader area is kept clear for action, and controls like pan and EQ are out of the way on low-profile sliders. Even the transform switches can be rotated to work the way you like them.
2 Dual Stereo Channels
Channels have RIAA [RCA] inputs, switchable to line, plus stereo line level inputs [RCA], each with gain control. Powerful 3-band EQ on sliders. High-quality 45mm faders. Input reverse switch for battle mixing. Pre-fade monitoring on 12-segment 3-color peak reading bar meters.
Mic Channel
2 XLR inputs with separate gain controls, on switch, and 3-band EQ with HPF. Routes direct to mix outputs. FX insert on button.
Stereo Mix Outputs
Balanced mix outputs on XLR with multipoint VCA level master control. The mix output level can be displayed on the 12-segment 3-color peak reading bar meters.
Booth Output
RCA outputs with level control for booth/link out to additional daisy-chained mixers
FX Loop
Channels have an effect loop on switch with silent FET switching. Effect insert points are separate [TRS] inputs and outputs
3-Band EQ
Powerful 3-band 12dB/octave EQ with asymmetric characteristic: +6dB boost emphasis and -26dB cut for frequency band elimination.
Penny & Giles VCA Crossfader
An ultrahigh quality Penny & Giles conductive plastic crossfader comes fitted as standard on the Xone:02. Replacement of crossfaders is easy - it takes only minutes to remove the faceplate and replace the fader unit.
Transform Switches
Performance channel mute controls which can be rotated to work up/down or left/right.
Engineer/DJ's Toolbox
High-powered headphone output with level and mute switch. Booth/link output on TRS with level. 12-segment, 3-color bar metering displays CH1&2 or mix. Channels have 12-segment, 3-color bar meters. CH1/CH2 cue fader allows preview of x-fades.
Power Supply
High-performance internal switched-mode power supply handles universal voltages
Allen & Heath Xone:02 Battle Mixer Specifications:
- Frequency response: 20Hz-30kHz 0/-1dB
- Distortion (THD+noise measured at +10dBu 1kHz): 0.04%
- Mix noise: non-weighted 22Hz-22kHz filter <-81dBu
- Dimensions: 14-1/5W" x 10-1/5"H x 3-1/2"D
- Weight: 9.9 lbs.
Allen & Heath Xone:02 Battle Mixer Features:
- 2 dual stereo channels
- Deluxe Penny & Giles VCA reversible crossfader
- Fader contour controls
- Transform switches can be rotated
- Powerful 3-band EQ on sliders
- Pre-fade monitoring on 12-segment 3-color peak reading bar meters
- Mic channel
- FX loop
- High-powered headphone output with level and mute switch
- High-quality 45mm faders
- Input reverse switch for battle mixing
- High-performance internal switched-mode power supply
Don't go into battle with anything less. Order today.